Antwort schreiben 
 
Themabewertung:
  • 0 Bewertungen - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Baumstrukturmodus | Linearer Modus
Festplatte Seagate Momentus 5400.6 defekt für Windows 7 - seagate momentus 5400.6
23-03-2011, 17:38
Beitrag: #1
Festplatte Seagate Momentus 5400.6 defekt für Windows 7 - seagate momentus 5400.6
In meinem Laptop ist eine 500GB Festplatte eingebaut, vor einiger Zeit hat die Festplatte auf einmal Daten meiner mit Bitlocker verschlüsselten Partition so zerstört, dass ich mein ganzes System neu aufsetzten musste. Nun glaube ich, dass die Festplatte nicht mehr richtig funktioniert. Als ich nämlich versucht habe meine System Partition mit Acronis Disk Director zu verschieben, kahm eine Fehlemeldung und die Daten waren wieder zersörrt (Hatte diesmal zum glück ein Backup). Ich habe mir mal die logdatei von SMART angeguckt und geshen, dass dort mehrere Festplatten Errors angezeigt werden, die ich leider nicht verstehe: Code: smartctl 5.39.1 2010-01-28 r3054 [i686-pc-linux-gnu] (local build)

Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6 series
Device Model: ST9500325AS
Serial Number: 6VE2Q76T
Firmware Version: 0001SDM1
User Capacity: 500.107.862.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Oct 5 20:18:49 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 140) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 075 006 Pre-fail Always - 199352698
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 395
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 33272763
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1578
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 388
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 26304
188 Command_Timeout 0x0032 100 076 000 Old_age Always - 100
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 048 037 045 Old_age Always In_the_past 52 (1 187 52 51)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 13
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 16
193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 13180
194 Temperature_Celsius 0x0022 052 063 000 Old_age Always - 52 (0 13 0 0)
195 Hardware_ECC_Recovered 0x001a 051 039 000 Old_age Always - 199352698
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 27327 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mmConfusedS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It 'wraps' after 49.710 days.

Error 27327 occurred at disk power-on lifetime: 928 hours (38 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 b6 d9 01

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 80 b6 d9 41 00 00:53:13.399 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:13.383 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:53:13.265 NOP [Abort queued commands]
60 00 08 80 b6 d9 41 00 00:53:10.982 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:10.965 SET FEATURES [Enable write cache]

Error 27326 occurred at disk power-on lifetime: 928 hours (38 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 b6 d9 01

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 80 b6 d9 41 00 00:53:10.982 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:10.965 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:53:10.879 NOP [Abort queued commands]
60 00 08 80 b6 d9 41 00 00:53:08.516 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:08.500 SET FEATURES [Enable write cache]

Error 27325 occurred at disk power-on lifetime: 928 hours (38 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 b6 d9 01

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 80 b6 d9 41 00 00:53:08.516 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:08.500 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:53:08.389 NOP [Abort queued commands]
60 00 08 80 b6 d9 41 00 00:53:06.095 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:06.082 SET FEATURES [Enable write cache]

Error 27324 occurred at disk power-on lifetime: 928 hours (38 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 b6 d9 01

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 80 b6 d9 41 00 00:53:06.095 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:06.082 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:53:05.968 NOP [Abort queued commands]
60 00 08 80 b6 d9 41 00 00:53:03.696 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:03.695 SET FEATURES [Enable write cache]

Error 27323 occurred at disk power-on lifetime: 928 hours (38 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 b6 d9 01

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 80 b6 d9 41 00 00:53:03.696 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:03.695 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:53:03.580 NOP [Abort queued commands]
60 00 08 80 b6 d9 41 00 00:53:01.297 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:53:01.292 SET FEATURES [Enable write cache]

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1578 -
# 2 Conveyance offline Completed without error 00% 996 -
# 3 Extended offline Completed without error 00% 995 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay. Außerdem kann ich nur noch 460GB von den 500GB nutzen.
Habe komplette Festplatten formatierung schon probiert hat aber leider nichts gebracht.
Hat jemand Ahnung was mit meiner Festplatte los ist bzw. wie ich sie nochmal ganz ausführlich testen kann. Der Windows Festplatten Test bricht beim booten immer ab.
Werde ich mir eine neue Festplatte kaufen müssen (bzw. Laptop zurückschicken wegen Garantie) oder kann man solche Fehler noch irgendwie beheben?
Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
23-03-2011, 18:46
Beitrag: #2
Re: Festplatte Seagate Momentus 5400.6 defekt für Windows 7 - seagate momentus 5400.6 wird nicht erkannt
Das du bei einer 500 GB Festplatte keine vollen 500 GB nutzen kannst, ist doch völlig normal.
Dein SMART sagt: User Capacity: 500.107.862.016 bytes
500107862016 bytes : 1024 = 488386584 kilobytes
488386584 kilobytes : 1024 = 476940,02 megabytes
476940,02 megabytes : 1024 = 465,76 gigabytes
passt doch also ...
Meine 1 TB Platte hat auch nur 931 GB nutzbar laut Windows 7 Explorer. Völlig normal.
Welche Meldungen meinst du jetzt genau, die du nicht verstehst?
Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
Tags
seagate momentus 5400.6, seagate momentus 5400.6 wird nicht erkannt, momentus 5400.6 defekt, seagate momentus 5400.6+wird nicht mehr erkannt, win7 dieser vorgang erfordert eine interaktive arbeitsstation, hp color laserjet 3550 treiber windows 7, scannen mit x7170 unter win7, hp color laserjet cm1312 mfp unter windows 7, epson perfection 1200 win7 treiber, treiber canoscan 5000f windows 7, schutzverletzung drucker eigenschaften windows 7, dwmhintdxupdate nicht gefunden, sites
« Ein Thema zurück | Ein Thema vor »
Antwort schreiben 


  • Druckversion anzeigen
  • Thema einem Freund senden
  • Thema abonnieren
Gehe zu:




Kontakt | Windows Forum | Nach oben | Zum Inhalt | Archiv-Modus | RSS-Synchronisation| Impressum